Panasonic OmniVision PV-QV200, Руководство по обслуживанию

Страница: 92 / 136

5. Main Cam Push Nut (Ref. No. 414) is not reusable.
If removed, install a new one.
11.1.3. Electrical Replacement Notes
1. Item numbers with capital letter E (Example: E1, E2,...) in the Ref.
No. column are shown in the exploded views.
2. The parts with " " mark are supplied as a unit, and their
individual parts are also supplied separately.
3. Unless otherwise specified;
All resistors are in , 1/4 W,±5%, carbon, K= 1,000 ,
M= 1,000 k .
All capacitors are in F, P= F,±10%.
All coils are in H, M= 1,000 H,±10%.
4. Abbreviation
RTL: Retention Time Limited
This indicates that the retention time is limited for this item. After
the discontinuation of this item in production, it will no longer be
available.
NR: Non Repairable Board Ass'y
MGF CHIP: Metal Glaze Film Chip
C CHIP: Ceramic Chip
COMPLX CMP: Complex Component
W FLMPRF: Wirewound Flameproof
C.B.A.: Circuit Board Assembly
P.C.B.: Printed Circuit Board
E.S.D.: Electrostatically Sensitive Devices
5. SERVICE OF CHIP PARTS
When servicing chip parts, please use a soldering iron of less
than 30 W. Refer to "
IC, TRANSISTOR AND CHIP PART
INFORMATION " page.
6. The parts with " " are 0 resistor. When replacing, a wire can
be substituted for a 0 resistor.
7. Capstan Stator C.B.A. replacement note:
The following parts on the Capstan Stator C.B.A. (VEMS0331) are
not supplied separately. Please order and replace with the circuit