6.Troubleshooting Guide
6.1 "U--" Error indication
*If there is an operation error, or if there is a problem with the washing machine, such as faulty draining,
spinning etc; operation will stop, the warning buzzer will sound, and an error indication will be displayed
Content
Method to clear
Check if abnormalities listed below are seen in the
external water hose
*Is something wrong with the drain hose?
*Is the clogging with lint ?
Malfunction of
*Is it crushed ?
Restart by opening
drain
*Is the tip soaked in water ?
and close of the lid.
*Is a small pipe used ?
*Is a part of hose at a height of over 10cm in midway?
*Is the extension hose longer than 2 meter ?
*Is the drain hose lay down ?
*Is the lid is open ?
Close the lid
*Check If condition of contact point of the lid switch.
*Is the washing machine in an unstead position, or is on
an inclined floor surface ?
Open the lid and
*Is the adjustable knob loose ?
redistribute the load.
*Is the laudry unevenly distributed in the tub ?
*Check if you have forgotten to connect the water hose
and to turn on the faucet.
*The water supply cut off?
Malfunction of
*Check if the water supply and the water supply hose
Opening and closing
water supply
are frozen.
the lid to return to
*Check if the connection of the water supply hose on
initial stage of water
feed valve is clogged with dirt.
supply.
*it is alarmed increase it is takes over 50 min. to reach
selected water level.
1.Remove the power cord
Child lock
*Check if you condition of remaining water in the tub.
plug and close the lid.
operated
*No remaining water in the tub.
2.After plug in and press
-->Child lock fuction has operated.
"POWER" switch to "ON"
position.
Indication
Check point
U99
U11
U12
U13
U14
The lid is open
Unbalanced load
-8-
Содержание NA-FS14G2
Страница 16: ...8 Wiring Diagram 15 ...