Panasonic NA-FS14G2, Руководство по обслуживанию

Страница: 8 / 24

Check Contents
• Press the "WASH" button to adjust L0 (initial
mode) to L1 (1-rank higher water level).
• Press "STAR/PAUSE" button to confirm.
• In case to change PCB or remove the V-belt.
set the V-belt tension to initail mode for useing
below procedure.
M
• The initial display will be indicated "b0"
after that, press "START / PAUSE" button once,
it shall be listened click sound six times to
set properly.
• "Digit lights" shall be indicated "E" initially,
Press "WASH" button to show the last error,
and press the wash botton again to return
to initial mode.
G
• If any error message occurred in the
past, "H" or "U" and some number shall
be indicated alternately.
If no error message occurred, the light
indicates "00".
‧
"Digit lights" shall be indicated "C" initially,
Press "WASH" button to change "Indication
H
of dight" of operation times.
Press once: Digit "Thousand
‧
Hundred"
Press twice: Digit "Ten
‧
One"
Operation condition
Check
Procedure
Lamp illumination condition
•Set to initial
mode for
tension of the
Belt
Number of times
the "Water lever"
button is pressed
3 E
4
• Indicate the
error message
of the last time.
• Indicate the
operation
times.
• Adjust the
water amount
against laundry
amount
detection
5
6
-7-