5
Please perform the following
before storing.
●
Turn off the power.
●
Rewind the power cord.
(Hold the plug to ensure the power
cord does not jump.)
●
Store the supplied nozzles.
Please replace the cloth dust bag in the following cases:
●
When the indicator turns red.(Turn the power control to the high position and lift the nozzle off the fl oor.)
●
Suction power has dropped.
Storage position
Remove the cloth dust bag fi rst.
●
Remove the pre-motor fi lter
and tap to release dust.
●
Gently wash with water and
dry in shade if dust is not
easily removed.
●
Return the pre-motor fi lter to
its original position.
●
Using an old toothbrush or similar tool,
clean any dust or lint from the brush.
●
Do not wash with water.
●
Replace the Exhaust fi lter.
●
To close
Attention
●
Do not use detergent or any other cleaning liquids.
●
Do not wash the pre-motor filter in a washing machine or dry it with a dryer or other source of hot air.
●
Attach the pre-motor filter correctly (to avoid damaging motor).
Cleaning
pre-motor
fi lter
Cleaning
nozzle
After one year
has passed…
If suction power does not return after removing dust…
Check for blockages in hose, telescopic wand, and nozzles. Clean the pre-motor filter.
Park position
If the cloth dust bag is not properly
installed, the dust cover will not close.
Slide the bag clip to open the
cloth dust bag, remove the dust,
then slide the bag clip back to its
original position.
Exhaust fi lter
(HEPA fi lter)
Pre-motor fi lter
Please check the following first if you have any problems. If your problem is still not solved, consult your local retailer.
‘It won’t switch on!’
Check that the plug is connected firmly and the socket
outlet is working normally.
(If a thermal cut-out device has activated, please wait
approx. 60 minutes until it has reset)
If the product still does not work, please take it to an
authorized service centre for repair.
‘The power cord is difficult to pull out/won’t come out!’
Please don’t compel to pull out the power cord, then rewind
and pull out repeatedly while pressing the cord rewind pedal.
‘The power cord won’t go back in!’
Please pull out the power cord for about 2-3m long,
then rewind the power cord again, while holding the plug.
Storing
Replacing the cloth dust bag
Caring for your cleaner
Trouble Shooting
CJ910(V01ZB8000)_ArPr.indd 5
CJ910(V01ZB8000)_ArPr.indd 5
2011/02/25 12:01:51
2011/02/25 12:01:51
