- 75 -
Recording
Applicable modes:
Taking Pictures with the Self-Timer
Note
•
When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the Self-timer indicator will blink and then may turn on brightly
operating as an AF Assist Lamp to allow the camera to focus on the subject.
•
We recommend using a tripod when recording with the Self-timer.
•
Depending on the recording conditions, the recording interval may become more than
2 seconds when [10S / 3PICTURES] is selected.
•
It is not possible to set [10S / 3PICTURES] in the following cases.
–
In Intelligent Auto Mode
–
When using Auto Bracket
–
When using White Balance Bracket
–
In [PANORAMA ASSIST], [FLASH BURST] and [PHOTO FRAME] in Scene Mode
–
During the Burst Mode
•
Setting of the self-timer cannot be performed in following conditions.
–
In [3D PHOTO MODE] in Scene Mode
–
When recording motion pictures
Press
2
[
ë
].
Press
3
/
4
to select the item and then
press [MENU/SET].
Item
Description of settings
[OFF]
—
[2SEC.]
Picture is taken after 2 seconds.
•
When using a tripod etc., this setting is a convenient way to
avoid the jitter caused by pressing the shutter button.
[10SEC.]
Picture is taken after 10 seconds.
[10S / 3PICTURES]
After 10 seconds the camera takes 3 pictures at about
2 second intervals.
Press the shutter button halfway to focus
and then press it fully to take the picture.
•
The Self-timer indicator
A
blinks and the shutter is
activated after 10 seconds (or 2 seconds).
•
When [10S / 3PICTURES] is selected, the Self-timer
indicator blinks again after the first and the second
pictures are taken and the shutter is activated
2 seconds after it blinks.
A