- 153 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu.
(P48)
∫
Canceling all the [PROTECT] settings
1
Select [PROTECT] on the [PLAYBACK] Mode menu.
2
Press
3
/
4
to select [CANCEL] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
•
Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[PROTECT]
Press
3
/
4
to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture, and then
press [MENU/SET] to set.
[MULTI] setting
•
Repeat these steps for each picture.
•
The settings are canceled when
[MENU/SET] is pressed again.
•
Exit the menu after it is set.
[SINGLE]
[MULTI]
Press
2
/
1
to select
the picture.
Press
3
/
4
/
2
/
1
to
select the pictures.
