Panasonic KXFLB881 - Network Multifunction Laser Printer, Руководство по эксплуатации

Страница: 44 / 104

6. Fax
44
6.8 Using the unit with an
answering machine
6.8.1 Setting up the unit and an answering
machine
1
Connect the answering machine (
1
).
L
Answering machine is not supplied.
L
Remove the stopper (
2
) if attached.
2
Set the number of rings on the answering machine to
4 rings or less.
L
This will allow the answering machine to answer
the call first.
3
Record a greeting message on the answering
machine.
L
We recommend you record a message up to 10
seconds long, and not to pause for more than 4
seconds during the message. Otherwise, both
machines will not function correctly.
4
Activate the answering machine.
5
Set the unit to the desired receiving mode (page 42).
L
If you set to FAX ONLY mode, change the ring
setting in FAX ONLY mode to “
5 EXT. TAM
”
(feature #210 on page 52).
6
Make sure each of the following are unique:
–
the remote access code of the answering
machine
– the fax activation code (feature #434 on page 55)
– remote access to Phone Companies Voice Mail
(if you subscribed)
Note:
L
If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
L
Regarding the remote access code for the answering
machine, see the operating instructions of the
answering machine.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
L
The answering device will answer the call.
2. The caller can leave a message after the greeting
message.
3. The caller presses
{*}{#}{
9
}
(pre-selected fax
activation code).
L
The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
L
To use this feature, make sure remote fax activation
is turned ON (feature #434 on page 55). The fax
activation code can also be changed.
L
If there is no room left in the memory of your
answering machine, the unit may not be able to
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
1
2
FLB881-PFQX2732ZA-OI-en.book Page 44 Wednesday, July 18, 2007 11:22 PM