Panasonic KXFLB881 - Network Multifunction Laser Printer, Руководство по эксплуатации

Страница: 54 / 104

9. Programmable Features
54
9.3 Fax features
Feature/Code Selection
Printing a confirmation report
{#}{
4
}{
0
}{
1
}
{
0
}
“
OFF
” : Confirmation reports will not be printed.
{
1
}
“
ON
” : A confirmation report will be printed after every fax transmission.
{
2
}
“
ERROR
” (default): A confirmation report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
{#}{
4
}{
0
}{
2
}
{
0
}
“
OFF
” : The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
{
1
}
“
ON
” (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 38).
Sending documents
overseas
{#}{
4
}{
1
}{
1
}
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
NEXT FAX
” : This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{
2
}
“
ERROR
” (default): When the previous fax transmission fails and you wish to
re-send the document.
Note:
L
This feature is not available for broadcast transmission.
L
Calling charges may be higher than usual.
Sending a fax at a specific
time
{#}{
4
}{
1
}{
2
}
This feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
{ 0 } “
OFF
” (default)
{
1
}
“
ON
”
To send a document:
1. If the { FAX } light is OFF, turn it ON by pressing { FAX } .
2. Set the original (page 17).
3. If necessary, change to the desired resolution (page 37) and the desired
contrast (page 37).
4.
{
MENU
}
i
{#}{
4
}{
1
}{
2
}
5. Press
{
1
}
to select “
ON
” .
i
{
SET
}
6. Enter the fax number.
L
To enter an item using one-touch dial feature and navigator directory,
see step 3 on “6.3.1 Using the scanner glass”, page 39. (When using
navigator directory, you do not have to press
{ DIRECTORY } before
pressing
{V}
or
{^}
.)
7.
{
SET
}
8. Enter the transmission start time.
L
Press
{*}
repeatedly to select “
AM
” or “
PM
” .
9. When using the scanner glass, press
{
SET
}
. i
{
START
}
When using the auto document feeder, press
{
SET
}
.
L
The document will be fed into the unit and scanned into memory. The
unit will then send the data at the specified time.
Note:
L
To cancel after programming, press
{
STOP
}
while the unit is idle, and then
press
{
SET
}
.
FLB881-PFQX2732ZA-OI-en.book Page 54 Wednesday, July 18, 2007 11:22 PM