Panasonic KX-UDS124 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 292

Panasonic KX-UDS124 Скачать руководство пользователя страница 2

Introduction

Outline

This Administrator Guide provides detailed information on the configuration and management of this SIP Cell
Station Unit (SIP-CS), which supports SIP-CS compatible Portable Stations (S-PSs).

Audience

This Administrator Guide contains explanations about the installation, maintenance, and management of the
SIP-CS and is aimed at network administrators and dealers.
Technical descriptions are included in this guide. Prior knowledge of networking and VoIP (Voice over Internet
Protocol) is required.

Related Documentation

Installation Guide

Briefly describes basic information about the installation of the SIP-CS.

Manuals and supporting information are provided on the Panasonic Web site at:

http://www.panasonic.com/sip

(for users in the United States)

http://panasonic.net/pcc/support/sipphone

(for users in all other countries/areas)

Technical Support

When technical support is required, contact your dealer.

Open Source Software Notice

Parts of this product use open source software. For details about the open source software, see

Source Software

Trademarks

•

Microsoft, Excel, Internet Explorer, Outlook, and Windows are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.

•

Mozilla and Firefox are registered trademarks of the Mozilla Foundation.

•

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

•

All other trademarks identified herein are the property of their respective owners.

NOTES

•

The screen shots shown in this guide are provided for reference only, and may differ from the screens
displayed on your PC.

•

The contents and design of the software are subject to change without notice.

2

Administrator Guide

Document Version 2013-03

Introduction

«
1
2
3
4
...
»

Содержание KX-UDS124





































































































































































































































































































Отзывы:

Нет отзывов