Panasonic KX-UDS124 страница 179 Скачать руководство пользователя

Страница: 179 / 292

Value Range

Max. 500 characters

Note

•

The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"

–

"<user>" must be less than 128 characters.

–

"<password>" must be less than 128 characters.

–

"<user>:<password>@" may be empty.

–

The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.

–

":<port>" can be omitted if you do not need to specify the
port number.

•

If "{mac}" is included in this URL, it will be replaced with the
SIP-CS’s MAC address in lower-case.

•

If "{MAC}" is included in this URL, it will be replaced with the
SIP-CS’s MAC address in upper-case.

•

If "{MODEL}" is included in this URL, it will be replaced with the
SIP-CS’s model name.

•

If "{fwver}" is included in this URL, it will be replaced with the
SIP-CS’s firmware version.

•

If this URL ends with "/" (slash), "{MODEL}.cfg" is automatically
added at the end of the URL.
For example,

CFG_PRODUCT_FILE_PATH="http://host/

dir/"

becomes

CFG_PRODUCT_FILE_PATH="http://

host/dir/{MODEL}.cfg"

Default Value

Empty string

Note

•

The URL specified by your dealer may be preset in the SIP-CS.

CFG_MASTER_FILE_PATH

Value Format

String

Description

Specifies the URL of the master configuration file, which is used when
all SIP-CSs need the same settings.

Note

•

When you change this setting, set "

PROVISION_ENABLE

" to

" at the same time.

Document Version 2013-03

Administrator Guide

179

4.2.5 Provisioning Settings

Содержание KX-UDS124





































































































































































































































































































Результаты поиска

Содержание KX-UDS124

Отзывы:

Похожие инструкции для KX-UDS124

Бренды по названию

Популярные бренды

Panasonic KX-UDS124, Руководство администратора

Результаты поиска

Содержание KX-UDS124

Отзывы:

Похожие инструкции для KX-UDS124

Бренды по названию

Популярные бренды