Panasonic KX-TVP200, Руководство по установке

Страница: 122 / 408

CUSTOMISING THE SYSTEM
122 Installation Manual
• Service Access Command—A caller can switch to Voice Mail service by dialling [#6]
during a call.
• Via Custom Service—This service can be assigned to a keypad digit within a Custom
Service. After pressing this key, the caller enters Voice Mail service.
5.2.7 Mailbox Groups
This programme allows a message to be delivered to several mailboxes at once. The message
activates the message waiting lamps on all of the proprietary telephones. These mailboxes may
be assembled into a list called a System Group Distribution List. The Message Manager can
record a voice label for each System Group Distribution List (see D6
RECORDING
MESSAGES). There are 20 group lists available, and each group list can have up to 20 entries.
To establish a mailbox group:
1.
From the System Administration Top Menu, Type [1-5-1-1-1]
(Program-System Parameter-System Group Assignment-Mailbox Group-Enter).
2.
Assign a List Number to the Mailbox Group. This number can be from 2-5 digits (same as
mailbox numbers). This number must be an unused number. In other words, the number
assigned to this group cannot be the same as another System Group Distribution List
number or mailbox number. For example, we will use the number 150.
There are 2 ways to use a System Group Distribution List:
Option A:
For inside messages: The System Group Distribution List number can be designed so
that any subscriber can press [2] and then enter the list number (which is [150] in this
example) to deliver a message. The message will be delivered to all specified mailboxes.
Option B:
For outside messages: The System Group Distribution List number can be designed as
a custom greeting for incoming callers. For instance, the greeting might be: "To leave a
message for the parts section, press 3". The digit "3" would be assigned to System Group
Distribution List number 150 in Custom Service Setting.
Each message waiting lamp will remain on until the message is cleared from the
individual station.
5.2.8 Extension Groups
An extension group places several extensions into the same mailbox. These extensions may be
assembled into a list called a Extension Group List. The extensions in the group list cannot
have a personal mailbox! When a message is left in this mailbox, it lights all of the message
waiting lamps of the phones that are in this group list. There are 20 group lists available, and
each group list can have up to 20 entries.
When a message is left for the extension group, it will light the message waiting lamps on each
phone. The first person that retrieves the call cancels the message waiting lamp on the other