Panasonic KX-TVP150E, Обзор, Страница: 155 / 849

Manager’s Guide
System Administrator
M-3-7
For system administration (system setup, mailbox setup, and
system diagnosis), the RS-232C terminal must be connected
to a serial interface of the VPS unit. The communication
parameters of the unit are set at the factory to these values.
The hardware settings:
— RS-232C (See 3.3.1.1)
— Telephone Line Port (See 3.3.1.2)
— Silence Reduction (See 3.3.1.3)
— PBX (See 3.3.1.4)
3.3.1.1 RS-232C
Baud Rate
The baud rate is set to 9600 bits per second at the factory,
but can also be set to 150, 300, 600, 1200, 2400, 4800, 9600
and 19200.
Word Bit Length
The word bit length is set to 8 bits at the factory but can
also be set to 7 bits.
Parity
The parity is set to ‘NONE’ at the factory, but can be set
to ‘EVEN’ and ‘ODD’.
Stop Bit Length
The stop bit length is set to 1 at the factory but can be set
to 2.
3.3.1.2 PBX Telephone Line Port
The VPS must be connected to a PBX telephone line port
before system startup of which there can be a maximum of
eight connections.
PBX Timed Break
Register Recall
The register recall can be used to transfer callers to an
attendant or other extensions. The register recall is the
duration of the register recall for call transfer. It is fixed
to 100 msec.
3.3.1 Hardware Settings
Note: The “Flash” means the register recall in this manual.