manualshive.com logo in svg

Panasonic KX-TVP150E, Обзор, Страница: 108 / 849

Поделиться
Скачать
Panasonic KX-TVP150E Скачать руководство пользователя страница 108

Thank you for purchasing the Panasonic Model KX-TVP150E,

Voice Processing System.

WARNING

• THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED

SERVICE PERSONNEL.

• THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG.  FOR

SAFETY REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN

EARTHING CONTACT SOCKET WHICH HAS BEEN INSTALLED ACCORDING

TO REGULATIONS.

• THE POWER CORD/MAINS PLUG IS USED AS THE DISCONNECT DEVICE.

• THE POWER SOCKET WALL OUTLET SHOULD BE LOCATED NEAR THIS

EQUIPMENT AND BE EASILY ACCESSIBLE.

• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

73/23/EEC
89/336/EEC
92/31/EEC
93/68/EEC

Warning
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.

APPROVED 

for connection to

telecommunication systems
specified in the instructions for use
subject to the conditions set out in
them.

NS / 1010 / 3 / R / 604965

Содержание KX-TVP150E


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов