background image

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

67

openLCR service for the 
Caller IQ feature

This unit is compatible with service 
provided by openLCR.

Important:

See the leaflet included with this unit for 
more information.

L

If you have any questions regarding 
the openLCR service, visit 
www.openLCR.com or call openLCR 
at 1-866-openLCR (1-866-673-6527).

L

NEITHER PANASONIC 
COMMUNICATIONS CO., LTD. NOR 
PANASONIC CORPORATION OF 
NORTH AMERICA IS IN ANY WAY 
AFFILIATED WITH, OR 
RESPONSIBLE FOR THE ACTS OR 
OMISSIONS OF, OPENLCR.COM, INC. 
NEITHER PANASONIC 
COMMUNICATIONS CO., LTD. NOR 
PANASONIC CORPORATION OF 
NORTH AMERICA NOR ANY OF 
THEIR EMPLOYEES OR AFFILIATES 
OR CUSTOMERS MAKE ANY 
WARRANTIES OR 
REPRESENTATIONS, EITHER 
EXPRESS OR IMPLIED, TO ANY 
CUSTOMER OR ANY OTHER THIRD 
PARTY WITH RESPECT TO ANY OF 
THE SERVICES PROVIDED BY 
OPENLCR.COM, INC., NOR ASSUME 
NOR CREATE ANY OTHER 
OBLIGATION OF ANY KIND ON 
BEHALF OF OPENLCR.COM, INC.

L

The Caller IQ service can only be 
activated after registering with openLCR 
at www.openLCR.com. More 
information regarding the openLCR 
service is available on the Internet at 
www.openLCR.com.

FCC RF Exposure Warning:

This product complies with FCC radiation 
exposure limits set forth for an 
uncontrolled environment. To comply 
with FCC RF exposure requirements the 
base unit must be installed and operated 
with its antenna located 20 cm or more 
between antenna and all person’s body 
(excluding extremities of hands, wrist 
and feet). The handset unit may be 
carried and operated with only the 
specific provided belt-clip. Other non-
tested belt-clips or similar body-worn 
accessories may not comply and must 
be avoided. The base and handset units 
must not be co-located or operated in 
conjunction with any other antenna or 
transmitter.

Responsible party:

Panasonic Corporation of North America
One Panasonic Way, 
Secaucus, New Jersey 07094
Phone number: 1-800-211-PANA (7262)

Содержание KX-TG5456













































































Отзывы: