Panasonic KX-TG5456, Руководство по эксплуатации

Страница: 62 / 76

Useful Information
62
For assistance, please visit http://www.panasonic.com/consumersupport
Answering system
The handset or base unit
does not announce the
displayed caller’s name
correctly.
L
Name pronunciation may vary. This feature may not
pronounce all names correctly.
L
The handset or base unit will announce each letter of
abbreviations, such as “Co.” and “Inc.”.
L
Caller ID supports a name of up to 15 letters. If the
caller’s name has more than 15 letters, the name will
not be announced correctly.
The caller list/incoming
phone numbers are not
edited automatically.
L
The Caller ID number auto edit feature is turned off.
Turn it on and try again (page 40).
L
You need to call back the edited number to activate
Caller ID number auto edit.
I cannot dial the phone
number edited in the
caller list.
L
The phone number you dialed might have an incorrect
edited pattern (for example, the long distance “1” or the
area code is missing). Edit the phone number with
another pattern (page 28).
The display exits the
caller list while searching.
L
The handset automatically exits after 1 minute of
inactivity.
The 2nd caller’s
information is not
displayed during an
outside call. (The Call
Waiting Caller ID (CWID)
feature does not
function.)
L
In order to use Caller ID, Call Waiting, or Call Waiting
Caller ID (CWID), you must first contact your telephone
company and subscribe to the desired service.
After subscribing, you may need to contact your
telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID).
The handset display does
not indicate that you have
new messages or missed
calls, even though you
do.
L
If the wallpaper feature is turned on, the wallpaper
pattern is displayed when you press
{
OFF
}
2 times. To
display “
New message
” or the number of missed calls
again, press
{
MENU
}
then
{
OFF
}
.
Problem Cause & solution
I cannot listen to
messages from a remote
location.
L
A touch tone phone is required for remote operation.
L
Press the remote code correctly and press each key
firmly (page 50).
L
The answering system is off. Turn it on (page 51).
E
flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
L
Message memory is full. Erase unnecessary messages
(page 47).
Problem Cause & solution