Useful Information
60
For assistance, please visit http://www.panasonic.com/consumersupport
Making/answering calls, Intercom
Problem
Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Move the handset and the base unit away from other
electrical appliances.
L
Move closer to the base unit.
L
Raise the base unit antennas.
L
Turn on the clarity booster feature (page 21).
L
If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset and base
unit do not ring.
L
The ringer volume is turned off. Adjust it (page 36, 42).
I cannot make a call.
L
The dialing mode may be set incorrectly. Set the dial
mode (page 18) to match the type of telephone service
you have (tone or pulse).
L
If the base unit (including answering system) is in use,
you may not be able to make a call. Try again later.
L
While listening to messages using the handset, you
cannot make a call. Exit by pressing
{
OFF
}
.
I cannot redial by
pressing
{
REDIAL
}
.
L
If the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
L
If you press
{
REDIAL
}
after you have started dialing,
this button functions as the
{
PAUSE
}
button. To redial,
do not dial any numbers before pressing
{
REDIAL
}
.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is connected
properly (page 57).
L
If “
SP-phone
” is displayed on the handset, press
{C}
to switch to the headset.
I cannot make long
distance calls.
L
Make sure that you have long distance service.
I cannot page the
handset or base unit.
L
The called handset is too far from the base unit.
L
The called unit is in use. Try again later.
Содержание KX-TG5456
Страница 74: ...74 Notes ...
Страница 75: ...75 Notes ...