Panasonic KX-TG4500B - Cordless Phone Base Station Скачать руководство пользователя страница 9

Страница: 9 / 124

Introduction

For assistance, please visit http://www.panasonic.com/phonehelp

For best performance

Base unit location/noise

The base unit and cordless handset(s) use

radio waves to communicate with each

other.
For maximum distance and noise-free

operation, we recommend the following:

Placing the unit away from electrical

appliances such as a TV, personal

computer or another cordless phone.

Placing the base unit in a HIGH and

CENTRAL location with no obstructions

such as walls.

Raising the antenna vertically.

If you use the cordless handset near a

microwave oven which is being used,

noise may be heard. Move away from

the microwave oven and closer to the

base unit.

If you use the cordless handset near the

base unit of another cordless phone,

noise may be heard. Move away from

the other base unit and closer to your

base unit.

Environment

Keep the unit away from electrical noise

generating devices such as fluorescent

lamps and motors.

The unit should be kept free from

excessive smoke, dust, high

temperature, and vibration.

The unit should not be exposed to direct

sunlight.

Do not place heavy objects on top of the

unit.

When you leave the unit unused for a

long period of time unplug it from the

power outlet.

The unit should be kept away from heat

sources such as heaters and kitchen

stoves. It should not be placed in rooms

where the temperature is less than 5 °C

(41 °F) or greater than 40 °C (104 °F).

Damp basements should also be

avoided.

The maximum calling distance may be

shortened when the unit is used in the

following places: near obstacles such as

hills, concrete walls, tunnels, subways,

or near metal objects such as wire

fences, etc.

Operating near appliances operating

near 5.8 GHz may cause interference.

Move away from these electrical

appliances.

Routine care

Wipe the outer surface of the unit with a

soft cloth. Do not use benzine, thinner,

or any abrasive powder.

Содержание KX-TG4500B - Cordless Phone Base Station





























































































































Результаты поиска

Содержание KX-TG4500B - Cordless Phone Base Station

Отзывы:

Похожие инструкции для KX-TG4500B - Cordless Phone Base Station

Бренды по названию

Популярные бренды

Panasonic KX-TG4500B - Cordless Phone Base Station, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG4500B - Cordless Phone Base Station

Отзывы:

Похожие инструкции для KX-TG4500B - Cordless Phone Base Station

Бренды по названию

Популярные бренды