17
Programmable Settings
Preparation
Date and Time
(use either
or
)
Set the clock with either the base unit or the cordless handset. You do not need to
program both on the base unit and the cordless handset.
• When entering the time, you cannot enter numbers greater than 12.
Do not use
military time.
(To set 13:00 hours, enter “0100”, and select “PM”
.)
• When the display language is set to French, you can use military time (see page
17 of the French Operating Instructions).
: Press
[CONF/FUNCTION]
, and follow steps 2 to 4 above, using
the cordless handset. Press the soft key (
), then press
[OFF]
.
1
Press
[FUNCTION/EDIT]
.
2
Scroll to “
Date and time
” by pressing
[ ]
or
[ ]
, then press
[ ]
.
3
(1) Enter the year, and month and day using
4-digit numbers. (e.g. To set Apr. 7, 2003,
enter “2003” and “0407”.)
(2) Enter the time (hour and minute) using a
4-digit number. (e.g. To set 9:30, enter
“0930”.)
• If you enter a wrong number, press
[ ]
or
[ ]
to
move the cursor to the incorrect number. Enter
the correct number.
4
Select “AM” or “PM” by pressing
[ ]
.
5
Press
[ ]
(
Save
).
• If 3 beeps sound, the setting is not correct. Start again from step 3.
• The clock starts working.
6
Press
[STOP]
.
If a power failure occurs, the time setting may be incorrect. When “
” flashes
on the base unit display, adjust the date/time.
For Call Display service users
(p. 30)
• Caller information will reset the clock after the first ring if the adjusted time is
incorrect.
• If the time has not previously been set, the caller information will not adjust the
clock.
• Caller information will automatically adjust the clock for daylight saving time.
Base Unit
Handset
Base Unit
▼
Date and time
▼
▼
Date:2003.12.31
Time:12:00 AM
0-9=Date&Time
=AM/PM =Save
2
Date:2003.04.07
Time:09:30 AM
0-9=Date&Time
=AM/PM =Save
AM
Handset
SA
VE
✻✴✥✪✪✣✰✲✷❍❆❋❂❍❂❏❊❇ ✤✪ ! "#$%&'
