Making cellular calls
Important:
R
The unit can be used to talk on 2 lines at the
same time (for example, 2 cellular lines, or the
landline and 1 cellular line).
R
Only 2 Bluetooth devices can be used with the
unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
R
Before making calls, confirm that the
corresponding CELL indicator on the base unit
lights up (page 14).
1
Dial the phone number.
R
To correct a digit, press
M
CLEAR
N
.
2
Press
M
CELL 1
N
or
M
CELL 2
N
.
3
Lift the corded handset.
4
When you finish talking, place the corded
handset on the cradle.
Note:
R
While on a call, you can switch from the base
unit to the cordless handset as follows.
The privacy mode must be off (page 43).
A
Handset:
M
CELL
a
MbN
: Select the
desired cellular phone.
a
M
SELECT
N
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
B
Base unit:
Place the corded handset on the
cradle. When the speakerphone is used, press
M N
.
R
During a conversation with the corded handset,
you can switch to the speakerphone by pressing
M N
, then place the corded handset on the
cradle.
Adjusting the receiver or speaker volume
Press
MDN
or
MCN
repeatedly while talking.
Note:
R
The receiver or speaker volume you set is kept
for each line (landline and cellular lines).
Making a cellular call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M
REDIAL
N
2
MbN
: Select the desired phone number.
3
Press
M
CELL 1
N
or
M
CELL 2
N
, then lift the
corded handset.
Erasing a number in the redial list
1
M
REDIAL
N
2
MbN
: Select the desired phone number.
a
M
ERASE
N
3
MbN
:
“
Yes
”
a
M
SELECT
N
4
M
EXIT
N
Making landline calls
1
Dial the phone number.
R
To correct a digit, press
M
CLEAR
N
.
2
Lift the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
R
You can also dial the phone number after lifting
the corded handset.
R
While on a call, you can switch from the base
unit to the cordless handset as follows.
The privacy mode must be off (page 43).
A
Handset:
Press
M
N
.
B
Base unit:
Place the corded handset on the
cradle. When the speakerphone is used, press
M N
.
Using the speakerphone
1
During a conversation with the corded
handset, press
M N
to turn on the
speakerphone.
R
You can place the corded handset on the
cradle.
R
Speak into the base unit microphone.
2
When you finish talking, press
M N
.
Note:
R
To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M
REDIAL
N
2
MbN
: Select the desired phone number.
3
Lift the corded handset.
24
For assistance, visit www.panasonic.ca/english/support
Making/Answering Calls Using the Base Unit
TG153CSK(en)_0422_ver021.pdf 24
2016/04/22 14:54:41