Problem
Cause/solution
I cannot connect a cellular phone
to the base unit.
R
Confirm that your cellular phone is turned on.
R
Confirm that your cellular phone is within base unit range
(page 13).
R
Your cellular phone’s Bluetooth feature is turned off. Turn it on.
R
Depending on the state of the wireless environment, such as
the presence of any electrical interference, there may be a
delay even if the auto connection feature is turned on. You can
connect to the base unit manually (page 18).
R
The cellular phone has not been paired to the base unit. Pair
the cellular phone (page 16).
R
If your cellular phone is already connected to another Bluetooth
device such as a Bluetooth headset or other Panasonic DECT
phone, disconnect the device, then perform the connecting
procedure to the base unit.
R
If your cellular phone is already registered on another
Panasonic DECT phone, this function will not work properly. We
strongly recommend that you remove the registration of this
phone on both your cellular phone and on the other Panasonic
DECT phone.
I cannot hear a dial tone.
R
Make sure that the CELL indicator lights up (page 14).
R
The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R
Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working telephone
operates properly, contact our service personnel to have the
unit repaired. If the working telephone does not operate
properly, contact your phone service provider.
The base unit beeps.
R
New messages have been recorded. Listen to the new
messages (page 58).
The unit does not work during a
power failure.
R
You can insert 2 AAA (R03) batteries (not supplied) into the
base unit that will power the unit temporarily in the event of a
power failure (page 10).
R
The base unit display is blank if the saving mode is
“
On
”
(page 10).
Menu list
Problem
Cause/solution
The display is in a language I
cannot read.
R
Change the display language (page 14).
I cannot register a handset to a
base unit.
R
The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 48).
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R
Battery charge is low. Fully charge the batteries (page 9).
For assistance, visit www.panasonic.ca/english/support
69
Useful Information
TG153CSK(en)_0422_ver021.pdf 69
2016/04/22 14:54:45
