Panasonic KX-TG153CSK, Руководство по эксплуатации

Страница: 47 / 80

4
MbN : “
Phonebook
” a M SELECT N
5
MbN : Select the phonebook entry. a M SAVE N
R “
Baby monitor
” will be displayed.
Note:
R If you edit a phonebook entry which is assigned
for monitoring, the edited entry does not transfer
to the monitor.
n By entering phone numbers:
1
M MENU N#268
2
MbN : “
On
” a M SELECT N
3
MbN : Select “
Outgoing call
” to monitor
from an outside line. a M EDIT N a M ADD N
4
MbN : “
Manual
” a M SELECT N
5
Enter the desired name. a M OK N
6
Enter the desired number. a M OK N a
M SELECT N
R “ Baby monitor ” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while baby
monitor is set to
“
On
” .
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “ On/Off ” a M SELECT N
3
MbN : “
Off
” a M SELECT N a M OFF N
Editing an outside monitoring number
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M SELECT N
3
MbN : “
On
” a M SELECT N
4
MbN : Select the outside line. a M EDIT N
5
M MENU N a MbN : “
Edit
” a M SELECT N
6
Edit the name if necessary. a M OK N
7
Edit the phone number if necessary. a M OK N
a M SELECT N
Erasing an outside monitoring number
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M SELECT N
3
MbN : “
On
” a M SELECT N
4
MbN : Select the outside line. a M EDIT N
5
M MENU N a MbN : “
Erase
” a M SELECT N
6
MbN : “
Yes
” a M SELECT N a M OFF N
Baby monitor sensitivity
You can adjust the sensitivity of the baby monitor.
Increase or decrease the sensitivity to adjust the
sound level needed to trigger the baby monitor
feature.
R This feature cannot be set during a monitoring
call.
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
Sensitivity level
” a M SELECT N
3
MbN : Select the desired setting. a M SAVE N
a M OFF N
Answering the baby monitor
Handset / Base unit
n When monitoring with a unit:
Handset:
Press M N to answer a call.
Base unit: Press M N to answer a call.
If you want to respond from the monitoring unit,
press
M MUTE N .
R The monitoring unit will answer calls
automatically when the auto intercom feature
is set to
“
On
” (page 27).
Note:
R If you receive an outside call when
communicating with the monitored handset,
the interrupt tone sounds.
– To answer the call with the handset, press
M OFF N , then press M N .
– To answer the call with the base unit, press
M N 3 times.
*1
*1 If M MUTE N is pressed, press MZN 2 times.
For assistance, visit www.panasonic.ca/english/support 47
Programming
TG153CSK(en)_0422_ver021.pdf 47 2016/04/22 14:54:43