manualshive.com logo in svg

Panasonic KX-TDA100D, Руководство по функциям

Поделиться
Скачать
Panasonic KX-TDA100D Скачать руководство пользователя страница 227

1.20.3  LED Indication

Description

The LED (Light Emitting Diode) of the Message/Ringer Lamp and following buttons (Line Status Buttons and
Corresponding Extension Status Button) show line conditions with a variety of light patterns.

Line Status Buttons:

 S-CO, G-CO, L-CO, INTERCOM, ICD Group, PDN

Corresponding Extension Status Button:

 DSS, SDN

1.

Light Pattern of the Message/Ringer Lamp

[DPT]

•

Incoming call from a trunk: Red flashing

•

Incoming call from another extension: Green flashing

•

Message(s) present (no incoming call): Red on

•

No message(s) present (no incoming call): Off

2.

Light Pattern of the Line Status Buttons

Light

Pattern

Line Status Button

Trunk Status

Intercom

Line Status

Incoming

Call

Distribution

Group Line

Status

S-CO

G-CO

L-CO

INTERCOM

ICD Group

Off

Idle

Green on

This extension is using the line.

Slow green
flashing

This extension is holding the line.

Moderate
green
flashing

This extension is holding the line using Exclusive Hold or using the line for an

Unattended Conference.

Rapid green
flashing

Incoming call/
Privacy
Release

Incoming call

Red on

Incoming call
for another
extension/
Another
extension is
using the line/
Another
extension has
the line on
Exclusive
Hold.

Other
extensions
are using all
trunks in the
trunk group.

—

This
extension is
logged out of
the incoming
call
distribution
group.

Slow red
flashing

Another
extension is
holding the
line.

—

Feature Guide

227

1.20.3 LED Indication

Содержание KX-TDA100D









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды