manualshive.com logo in svg

Panasonic KX-TD1232E, Руководство по установке

Поделиться
Скачать
Panasonic KX-TD1232E Скачать руководство пользователя страница 575

8.2.4

Installing the Unit

DECT Portable Station Section 

8-17

8.2.4

Installing the Unit

8. Tie all of the cords into a bundle.  If

other cords are exposed in the upper
cabinet, tie them also.

9. Close the cabinet cover and secure the

outside screw.

10. Cover the cords with the cord holder

(included).

11. Fix the cords to the wall as shown so

that the front cover can be opened.

Note     If two expansion units are installed, cut

the cabinet cover(s) on the lower cabi-
net(s) to allow the cords from the upper
cabinet to go down through the cabinet
cover(s).  To protect the cords, smooth
any cut edges.

D1232

DIGITAL SUPER HYBRID SYSTEM

Panasonic

D1232

DIGITAL SUPER HYBRID SYSTEM

Panasonic

Cord holder

Cut here

SAFETY CAUTION for KX-TD144
The small cover which provides access to
connectors CN402, CN403, CN404 and
CN405 shall not have its cable knock-out
section removed, unless another expansion
unit is mounted above which would prevent
finger access via the cable knock-out open-
ing.  This safety requirement is necessary to
protect users from network voltages.

Содержание KX-TD1232E










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды