Panasonic KX-TD1232E, Руководство по установке

Страница: 470 / 713

4.8 Extension Programming
Extension Group Assignment
602
4-128 System Programming
Description
Assigns each extension to an extension group. Extension groups
are used for Group Call Pickup and Paging – Group.
Selection
• Jack number: KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
( =all jacks, -1 = first part, -2 = second part)
• Extension group number: 01 through 16, ( =all groups)
• Disable (not belong) / Enable (belong)
Default
All jacks-1/2 – Extension group 1:Enable
Programming
1. Enter 602.
Display: EXT Group Asn
2. Press NEXT.
Display: Jack NO?
→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:EG01:Enabl
4. Enter the extension group number.
You can also keep pressing
or
until the desired extension
group number is displayed.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
8. Repeat steps 4 through 7.
9. Press END.
Conditions
• There is a maximum of sixteen extension groups. Each extension can
belong to more than one group.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master
System and 33 through 64 are for the Slave, if available.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7 of the Installation manual.
• To assign all jacks to one extension group, press the key in step 3.
In this case, the display shows the contents programmed for Jack 01.
Feature References
Section 3, Features,
Call Pickup, Group
Extension Group
Paging – Group