Panasonic KX-TD1232E, Руководство по установке

Страница: 239 / 713

3 Features
P
Features 3-137
P
hantom Extension
Description
Allows the system to route the calls to a phantom extension. A call
to a phantom extension arrives at an extension who has the
corresponding Phantom Extension button. A Phantom Extension
button can be assigned by Station Programming.
Conditions
• Types of calls whose destination can be the phantom extension are:
Outside calls – DIL 1:1; DDI; IRNA; Hunting Group-Overflow
Intercom calls – Extension; Transfer
• You can call the phantom extension by pressing the Phantom Extension
button or by dialling the phantom extension number. If several
extensions have the same phantom extension button, they will ring
simultaneously.
• A phantom number must be assigned by System Programming before
assigning the Phantom Extension button by Station Programming.
• There is a maximum of 128 phantom numbers. Each number has two to
four digits, consisting of numbers 0 through 9.
• The phantom number cannot be used for feature settings such as Call
Forwarding.
• The lighting patterns and status of the Phantom Extension button are
shown below.
• A DSS button can be assigned as the Phantom Extension button so that
the operator can use the button for transferring a call.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[130] Phantom Extension Number Assignment
Station Programming.......................................................User Manual,
Customising the Buttons – Phantom Extension Button
– To set a phantom extension ringing or not
Feature References
None
Operation References
Operation – Making Calls
—User Manual
Easy Dialling – To a Phantom extension
Phantom Extension Status
Idle
Calling a phantom extension
Incoming call
Lighting pattern
Off
Red on
Green rapid flash