manualshive.com logo in svg

Panasonic KX-TD1232E, Руководство по установке

Поделиться
Скачать
Panasonic KX-TD1232E Скачать руководство пользователя страница 571

8.2.4

Installing the Unit

DECT Portable Station Section 

8-13

8.2.4

Installing the Unit

The following procedures can be used to install a Cell Station
Interface Unit (KX-TD144 / KX-TD146) to the main unit, and then
the Cell Station (KX-TD142) to the Cell Station Interface Unit.
The KX-TD1232 is illustrated as the main unit.

1. Loosen the two screws on the cover

plate.  Insert your fingers into the slits
to remove the cover plate(s).

Note     Any of the cover plates can be

removed as required.

2. Connect the cabinet cord of the Cell

Station Interface Unit (KX-TD144 /
KX-TD146) to the connector in the
main unit firmly.

D1232

DIGITAL SUPER HYBRID SYSTEM

Panasonic

Slit

Slit

5. Secure the inside screw (included) to

fix the cabinet to the main unit.

Panasonic

Outside screw

Inside screw

3. Hook the cabinet on the main unit and slide

the cabinet to the left until it is secured.

Panasonic

Panasonic

D1232

DIGITAL SUPER HYBRID SYSTEM

4. Loosen the outside screw and slide the

cover to the right.

Panasonic

Note Be sure to fix the inside screw to the

main unit, or the unit may not work
properly.

Содержание KX-TD1232E










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды