Panasonic KX-TD1232E, Руководство по установке

Страница: 506 / 713

4.9 LCR Programming
LCR Carrier Modify Command
7X22
4-154 System Programming
Description
Assigns modification commands applied to carrier numbers.
Dialled numbers are modified according to the programmed
commands. Available commands are as follows:
C : Insert carrier code
P : Send pause
T : Change to tone (DTMF) mode
A : Insert Authorization code
I : Insert Itemized code
H : Home Position
Selection
• Program address: 7X22, X=1-8 (carrier number)
• C/P/T/A/I/H, 16 entries (max.)
Default
Program 7122 (carrier 1) – CPTAIH;
Other programs (carriers 2-8) – Not stored
Programming
1. Enter a program address (7X22).
Display example: Modify Command C1
2. Press NEXT.
Display example: CPTAIH
3. Keep pressing SELECT until the desired selection is
displayed.
4. To select other commands for the same carrier, press and
press SELECT for the desired command until all the required
entries are completed.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and repeat steps 4 and 5.
5. Press STORE.
6. Press END.
Conditions
There is a maximum of 8 carriers, each of which can be given a
maximum of 16 commands.
Feature References
Section 3, Features,
Least Cost Routing (LCR)