Panasonic KX-TCD955EC Скачать руководство пользователя | Manualshive

Страница: 62 / 64

background image

62

GUARANTEE

CONDITIONS OF GUARANTEE

This guarantee is in addition to and does not in any way affect any statutory or other
rights of consumer purchasers. If within the applicable guarantee period, the appliance
proves to be defective by reason of faulty design, workmanship or materials, we
undertake subject to the following conditions to have the defective appliance (or any part
or parts there of) repaired or replaced free of charge.
1. The appliance shall have been purchased and used solely within the UK and in

accordance with standard operating instructions and the technical and/or Safety
Standards required in the UK.

2. The appliance should be returned together with this guarantee and proof of date of

purchase promptly on being found defective at the purchaser’s risk and expense to
the authorised dealer from whom the appliance was purchased or to the nearest
authorised dealer. All enquires must be through such dealers.

3. This guarantee shall not apply to damage caused through fire, accident, lightning,

misuse, wear and tear, neglect, incorrect adjustment or repair, to damage caused
through installation, adaption, modification or use in an improper manner or
inconsistent with the technical and/or safety standards required in the country where
this appliance is used, or to damage occurred during transit to or from the purchaser.

4. If at any time during the guarantee period any part or parts of the appliance are

replaced with a part or parts not supplied or approved by us or of an objective quality
safe and suitable for the appliance, or the appliance has been dismantled or repaired
by any person not authorised by us, we shall have the right to terminate this
guarantee in whole or in part immediately without further notice.

5. The purchaser’s sole and exclusive remedy under this guarantee against us is for the

repair or replacement of the appliance or any defective part or parts and no other
remedy, including, but not limited to, incidental or consequential damage or loss of
whatsoever nature shall be available to the purchaser.

6. This guarantee shall not apply to cassette tapes, batteries and any other items of

limited natural life.

7. Our decision on all matters relating to complaints shall be final. Any appliance or

defective part which has been replaced shall become our property.

8. The guarantee period applicable to this product shall be 12 months.

Please keep these Operating Instructions with your receipt.

Panasonic Business Systems U.K.

Receipt No.

Date of Purchase

Model No. KX-TCD955EC

Serial No.

KX-TCD955EC(056~064) 99.6.16 5:26 PM Page 62

«
...
60
61
62
63
64
»

Содержание KX-TCD955EC

































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TCD955EC

Бренд: D-Link Страницы: 67

Бренд: NEC Страницы: 36

Бренд: NEC Страницы: 174

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 66

Бренд: NEC Страницы: 62

Бренд: Yealink Страницы: 2

Бренд: Uniden Страницы: 44

Бренд: Viking Страницы: 1

FREELANCE XC 1500

Бренд: BT Страницы: 2

Enterprise Edge CAPN

Бренд: Nortel Страницы: 7

Бренд: Radio Shack Страницы: 28

SAPHIR TH-052DRB

Бренд: THOMSON Страницы: 24

EASA-PHONE KX-T30820

Бренд: Panasonic Страницы: 6

Бренд: Geemarc Страницы: 94

Бренд: Blaupunkt Страницы: 28

Бренд: Uniden Страницы: 76

Бренд: Sony Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды