manualshive.com logo in svg

Panasonic KX-TCD955EC, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TCD955EC Скачать руководство пользователя страница 58

58

Before Requesting Help

Problem

The paged handset does not answer.

While using the intercom, two tones
sound.

The unit misdials when connected to a
PBX.

You cannot register the handset in the
base unit.

“

” flashes or the unit beeps every

15 seconds.

You charged the batteries fully, but
“

” flashes.

The charge indicator (

) light never

goes out while charging.

Remedy

•

The handset is not in the same radio area.

•

The handset is engaged in an outside call.

•

The handset has been cancelled or has not been

registered. Register the handset in the base unit 
(p. 45).

•

A call is being received. To answer, press 

twice.

•

Check the pause function (p. 28).

•

The base unit has registered a maximum of 6
handsets or the handset has registered a maximum
of 4 base units.

•

A wrong base unit password was entered. Enter the
correct password.

•

There is interference from other electrical units.
Locate the handset and base unit away from them.

•

You must finish registration within 1 minute after the
ringer tone sounds, or programming will be cancelled
(p. 45).

•

Charge the batteries fully (p. 11).

•

Clean the charge contacts and charge again (p. 11).

•

Install new batteries (p. 54, 60).

•

This is normal.

KX-TCD955EC(056~064)  99.6.16  5:25 PM  Page 58

Содержание KX-TCD955EC

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды