Panasonic KX-TCD955EC, Руководство по эксплуатации

Страница: 16 / 64

To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM.
While talking, press
F
or
G
to select the
desired level.
•
The display shows the volume level.
•
After a few seconds, the display will return to
the length of the call.
OR
In the stand-by mode, proceed as follows.
1
Press .
2
Press
G
or
F
until the arrow points to
“
Program
”, then press OK
H
.
3
Press
G
or
F
until the arrow points to
“
Receiver Volume
”, then press
OK
H
.
4
Press
F
or
G
to select the desired
level.
5
Press
OK
H
.
•
The display will return to “
Receiver
Volume
”. To return to the stand-by
mode, press or wait for 60 seconds.
C
F
R e c e i v e r V o l u m e
L O W H I G H
16
0 0 - 0 0 - 0 0
To dial after confirming the
entered number
1
Enter a phone number.
•
The entered number is displayed.
•
If you misdial, press
I
. Digits are erased
from the right.
•
To cancel, press
I
firmly.
•
If your line has rotary or pulse service, any
access numbers entered after pressing
will not be included when dialling.
2
Press .
•
“ ” is displayed.
•
After a few seconds, the display will start
showing the length of the call.
3
To hang up, press or place the
handset on the base unit.
•
The handset will return to the stand-by
mode.
Making Calls
Make sure that the power is ON (p. 12).
1
Press .
•
“ ” is displayed.
2
Dial a phone number.
•
The dialled number is displayed.
•
After a few seconds, the display will start
showing the length of the call.
•
If “ ” flashes and an alarm tone sounds
after pressing
, move closer to the
base unit. Then try again.
•
You can choose whether to display the length
of the call or phone number in the talk mode
by programming (p. 41).
3
To hang up, press or place the
handset on the base unit.
•
The handset will return to the stand-by
mode.
Ex. LOW is selected.
1 2 3 4 5 6 7 8
KX-TCD955EC(016~023) 99.6.16 7:01 PM Page 16