Panasonic KX-TCD955EC Скачать руководство пользователя страница 56

Страница: 56 / 64

Before Requesting Help

Remedy

•

Turn the power ON (p. 12).

•

Check the settings (p. 9–15).

•

Charge the batteries fully (p. 11).

•

Clean the charge contacts and charge again (p. 11).

•

Unplug the AC adaptor and turn the power OFF to

reset. Plug in the AC adaptor and turn the power ON.
Then try again.

•

The handset has been cancelled or has not been

registered. Register the handset (p. 45).

•

Re-install the handset batteries and try again.

•

You are too far from the base unit. Move closer and

try again.

•

Plug in the AC adaptor.

•

Another handset is in use.

•

Check that the dialling mode selection is correct

(p. 13).

•

The unit is in call prohibition mode. Cancel the mode

(p. 37).

•

The dialled number is restricted. Cancel the number

(p. 39).

•

Key lock mode is set. Cancel the mode (p. 30).

•

The handset is out of range. Move closer to the base

unit and make the call again.

•

Plug in the AC adaptor.

•

Locate the handset and base unit away from other
electrical appliances (p. 5).

•

Move closer to the base unit.

Problem

The unit does not work.

“

” flashes and an alarm tone sounds

when you press .

A busy tone sounds when you
press .

You cannot dial.

“

” flashes during a conversation and

the call is disconnected.

Static, sound cuts in/out, fades.
Interference from other electrical units.

KX-TCD955EC(056~064) 99.6.16 5:25 PM Page 56

Содержание KX-TCD955EC

































































Результаты поиска

Содержание KX-TCD955EC

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TCD955EC, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD955EC

Отзывы:

Бренды по названию

Популярные бренды