background image

22

< E n t e r   N a m e >

0 1 2 3 4 5 6 7 8 9

Using the Caller List

Storing Caller List Information in the Phonebook

You can store phone numbers that are in the Caller List in the phonebook. You can also select a
separate ring tone for callers by setting “Private ring” (p. 24).
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

9

Press 

G

or 

F

to select private ring ON

or OFF.

10

Press 

OK

H

.

11

While “

Save

” is at the arrow, press

OK

H

.

A confirmation tone sounds.

The display will show “

Saved

”. The

display will show the next caller
information.

12

Press 

to return to the stand-by

mode.

C

If the display shows “

Memory full

” in

step 6, the handset will return to the stand-by
mode. To clear other stored items from the
phonebook, see page 27.

1

Press .

2

Press 

G

or 

F

until the arrow points to

Caller ID

”.

3

Press 

OK

H

.

The most recent caller’s information is
displayed.

4

Press 

G

or 

F

until the desired caller

number is displayed.

5

Press 

OK

H

.

6

While “

Save Phonebook

” is at the

arrow, press 

OK

H

.

The display shows the number of
remaining phonebook items, then

<Enter name>

”.

F

P r i v a t e   R i n g

O N

H

O F F

H

S a v e
G o   B a c k

7

Enter the name up to 16 characters 
(p. 25). When finished, press 

OK

H

.

If the number requires editing, see step 7
on page 21.

8

Press 

OK

H

.

Ex. Private ring is ON.

KX-TCD955EC(016~023)  99.6.16  7:01 PM  Page 22

Содержание KX-TCD955EC

































































Отзывы: