Panasonic KX-TA30820B Скачать руководство пользователя страница 127

Страница: 127 / 198

Telephone Features

3-73

3.2

Telephone Features

Conditions

• Helpful hints for the Hands-free operation:

— Use this unit in a quiet room for best performance.
— If you and the other party talk at the same time, parts of your conversation will be

lost. To avoid this, talk alternately.

• The hands-free mode is canceled if you do not start dialing within ten seconds.

• The KX-TA30850 has a MONITOR button instead of a SP-PHONE button. It can be

used for hands-free dialing, etc., but it cannot be used for a hands-free conversation.

• You can enable the hands-free mode by pressing a CO or INTERCOM button.

Hands-free Operation

(— for KX-TA30820/KX-TA30830 only)

Allows you to dial and to talk to the other party without lifting the handset.

Press SP-PHONE.

SP-PHONE

• The microphone and speaker are now activated and the

hands-free operation is available.

Press SP-PHONE.

Hang up.

SP-PHONE

• Do not replace the handset without pressing the SP-PHONE button

first, or the line will be disconnected.

Lift the handset.

Switching from the handset to hands-free mode

Switching from hands-free to the handset mode

Содержание KX-TA30820B







































































































































































































Результаты поиска

Содержание KX-TA30820B

Отзывы:

Похожие инструкции для KX-TA30820B

Бренды по названию

Популярные бренды

Panasonic KX-TA30820B, Руководство пользователя

Результаты поиска

Содержание KX-TA30820B

Отзывы:

Похожие инструкции для KX-TA30820B

Бренды по названию

Популярные бренды