Panasonic KX-NS300, Руководство по программированию ПК

Страница: 277 / 752

Name Description Value Range Links
Port Type Selects the port type.
Each ISDN connection in a
QSIG network must have a
master port on one PBX and
a slave port on another PBX.
ISDN extensions can belong
to an incoming call
distribution group or idle
extension hunting group. In
this case, an MSN can be
assigned. CO: For connecting to
public network
Extension: For connecting
to extension
QSIG-Slave: For
connecting to private
network (slave port)
QSIG-Master: For
connecting to private
network (master port)
Connection Indicates the port status. To
change the status of the
port, click the desired cell in
the column, and then select
INS or OUS for the port.
This option is only available
in On-line mode.
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
COLP, CLIR,
COLR, CNIP,
CONP, CNIR,
CONR, CF
(Rerouting),
CT, CCBS,
AOC-D, AOC-
E, 3PTY Specifies whether each
ISDN or QSIG
supplementary service is
used. For COLP, CLIR, COLR,
CNIP, CONP, CNIR,
CONR, CF (Rerouting),
CT, CCBS, AOC-D, AOC-
E:
No, Yes
For 3PTY:
No, Yes-3Pty
Feature Manual
References
4.1.2.2 Calling/Connected
Line Identification
Presentation (CLIP/COLP)
4.1.2.3 Advice of Charge
(AOC)
4.1.2.5 Call Forwarding
(CF)—by ISDN (P-P)
4.1.2.7 Call Transfer (CT)
—by ISDN
4.1.2.8 Three-party
Conference (3PTY)—by
ISDN
4.1.2.10 Completion of
Calls to Busy Subscriber
(CCBS)
4.3.4.2 Calling/Connected
Line Identification
Presentation (CLIP/COLP)
and Calling/Connected
Name Identification
Presentation (CNIP/
CONP)—by QSIG
4.3.4.3 Call Forwarding
(CF)—by QSIG
4.3.4.4 Call Transfer (CT)
—by QSIG
4.3.4.5 Completion of Calls
to Busy Subscriber
(CCBS)—by QSIG
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
PC Programming Manual 277