Panasonic KX-NS300, Руководство по программированию ПК

Страница: 215 / 752

Name Description Value Range Links
Connection
Indicates the port status. To change the
status of the port, click the desired cell in
the column, and then select
INS or OUS
for the port.
This option is only available in On-line
mode.
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
T38 FAX Max
Datagram
Specifies the maximum datagram size
when using the T.38 protocol. 272–512
T38 FAX UDPTL
Error Correction –
Redundancy
Specifies whether to enable the
redundancy feature when using the T.38
protocol. Disable, Enable
T38 FAX UDPTL
Redundancy count for
T.30 messages
Specifies the redundancy count for T.30
messages when using the T.38 protocol. 0–7
T38 FAX UDPTL
Redundancy count for
data
Specifies the redundancy count for data
when using the T.38 protocol. 0–3
T38 FAX Rate
Management Method
Specifies the rate management method
when using the T.38 protocol. Transferred TCF, Local
TCF
Reject T.38 Request
from Network
Specifies whether T.38 protocol data
requests are rejected or accepted. Disable, Enable
T.38 FAX NAT
Traversal
Specifies the NAT Traversal packet type
when sending or receiving faxes using the
T.38 protocol. Disable, Blank UDP
T.38 Option
The Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
Name Description Value Range Links
Connection
Indicates the port status. To change the status of
the port, click the desired cell in the column, and
then select
INS or OUS for the port.
This option is only available in On-line mode.
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
T38 FAX QoS
Available
Specifies the type of value to be stored in the
ToS field in the IP header when using the T.38
protocol. ToS, DSCP, HEX
T38 FAX
QoS-ToS Priority
Specifies the priority level in the ToS field when
using the T.38 protocol. 0–7
T38 FAX
QoS-ToS Type
Specifies the ToS type in the ToS field when
using the T.38 protocol. Normal, Monetary Cost,
Reliability, Throughput,
Delay
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
PC Programming Manual 215