Panasonic KX-MB2000FR, Руководство по эксплуатации

Страница: 67 / 124

Feature/Code Selection
Changing the fax activation
code
MBNM 4 NM 3 NM 4 N
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
1. M Menu N A MBNM 4 NM 3 NM 4 N
2. Press M 1 N to select “
ON
” . A M Set N
3. Enter your code from 2 to 4 digits, using 0–9, MGN and MBN .
R The default code is “ H
#9
” .
R Do not enter “0000”.
4. M Set N A M Menu N
Changing the silent fax
recognition ring count
MBNM 4 NM 3 NM 6 N
To change the number of times the unit rings while in TEL/FAX mode.
M 3 N “
3
” (default)
M 4 N “
4
”
M 5 N “
5
”
M 6 N “
6
”
M 7 N “
7
”
M 8 N “
8
”
M 9 N “
9
”
Note:
R See page 50 for details.
Setting the memory reception
alert
MBNM 4 NM 3 NM 7 N
To alert you with a beeping sound when a received fax document is stored into
memory.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 81 to page 83 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
R If documents are stored into memory due to activating the web fax preview
(feature #448 on page 54), the unit will not beep. However, the unit will start
to beep when the memory is nearly full.
Setting friendly reception
MBNM 4 NM 3 NM 8 N
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M 0 N “
OFF
” : You have to press M Start N , and then M 2 N for fax reception.
M 1 N “
ON
” (default): You do not have to press M Start N , and then M 2 N for fax
reception.
67
8. Programmable Features