Panasonic KX-MB2000FR, Руководство по эксплуатации

Страница: 61 / 124

Feature/Code Selection
Setting recall/flash time
MBNM 1 NM 2 NM 1 N
(KX-MB2025/KX-MB2030
only)
The recall/flash time depends on your telephone exchange or host PBX.
M 0 N “
900ms
”
M 1 N “
700ms
”
M 2 N “
600ms
”
M 3 N “
400ms
”
M 4 N “
300ms
”
M 5 N “
250ms
”
M 6 N “
200ms
”
M 7 N “
160ms
”
M 8 N “
110ms
”
M 9 N “
100ms
”
MGN “
90ms
”
MBN “
80ms
”
Note:
R The default may vary depending on the model.
R If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
MBNM 1 NM 4 NM 5 N
M 1 N “
NORMAL
” (default)
M 2 N “
DARKER
”
Selecting the scale
MBNM 1 NM 4 NM 7 N
M 1 N “
MILLIMETRES
” (default)
M 2 N “
INCHES
”
Note:
R The selected scale will be used when measurements are shown on the
unit’s display.
Changing the password for
feature programming via
remote operation
MBNM 1 NM 5 NM 5 N
1. M Menu N A MBNM 1 NM 5 NM 5 N A M Set N
2. Enter the current password. A M Set N
R The default password is “
1234
” .
3. Enter a new 4-digit password using 0–9. A M Set N
4. Enter the new password again. A M Set N A M Menu N
Note:
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser
(KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only).
Setting the toner
maintenance time
MBNM 1 NM 5 NM 8 N
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. M Menu N A MBNM 1 NM 5 NM 8 N A M Set N
2. Enter the maintenance start time.
R The default time is “
12:00
” .
R If you selected 12-hour time entry (page 22), press MHN repeatedly to
select AM or PM.
R If you selected 24-hour time entry (page 22), the time is set using 24-hour
time entry.
3. M Set N A M Menu N
61
8. Programmable Features