Panasonic KX-HGW600, Руководство по эксплуатации

Страница: 95 / 152

Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
S
ystem
Featur
es
Instructions for the data fields
Note
When Auto is displayed in the Current Status table, you cannot change the
settings because the KX-HGW600 has set up Network Camera automatically.
Entry Check Enabled or Disabled . When you check Enabled , the
entry works as specified. When you check Disabled , the
entry does not work but will work when you check Enabled
later.
Protocol Select the protocol(s) to send or receive data to/from the
WAN side.
TCP , UDP , TCP&UDP , ICMP or PPTP are
available.
Forwarding Port No. Set the port number(s) to send or receive data to/from the
WAN side. Do not enter the space.
• When a single port is desired, set the port number.
• When a range of port is desired, enter the range using "-".
For example, to set the port numbers from 2000 to 3000,
enter as "2000-3000". The starting port number must be
lower in value than ending port number.
The port numbers from 60000 to 60016 are only available
for the KX-HGW600.
Forwarding IP
Address Enter the private IP address of each device connected to the
KX-HGW600. A data from the Internet is forwarded to the IP
address entered in this data field. In this case, set the IP
address of the corresponding Network Camera to this value.