background image

9. Help

72

For assistance, please visit http://www.panasonic.com/consumersupport

REMOVE DOCUMENT

L

The document is jammed. Remove the jammed document (page 
85).

L

Attempted to send a document longer than 600 mm (23

5

/

8

"). Press 

{

STOP

}

 to remove the document. Divide the document into two or 

more sheets and try again.

REPLACE DRUM

CHANGE SUPPLIES

L

The drum life is complete. Replace the drum unit immediately 
(page 79).

RX MEMORY FULL

L

The memory is full of received documents due to a lack of 
recording paper or a recording paper jam. Install paper (page 15) 
or clear the jammed paper (page 82).

L

If you select the computer that will be used for receiving a fax in 
feature #443 (page 67), and feature #442 is set to 

ALWAYS

 (page 

65), check the connection between the computer and the unit.

TONER EMPTY

CHANGE SUPPLIES

L

The toner life is complete. Replace the toner cartridge immediately 
(page 79).

TONER LOW

CHANGE SUPPLIES

L

The toner life is near to an end. Replace the toner cartridge as 
soon as possible (page 79).

TOP COVER OPEN

L

The top cover is open. Close it.

TRANSMIT ERROR

L

A transmission error occurred. Try again.

WARMING UP

L

The inside of the unit is cold. Let the unit warm up. Wait for a while.

L

The unit is warming up before operation starts. Wait for a while.

WRONG PAPER

L

The fax message was printed on paper which is shorter than letter 
size paper. Use the appropriate size paper (page 93).

Display

Cause & Solution

FLB851-PFQX2175YA-en.book  Page 72  Thursday, September 8, 2005  2:24 PM

Содержание KX-FLB851 - All-in-One Flatbed Laser Fax















































































































Отзывы: