70
The following will be shown on the KX-F1100AL only.
¡
Battery power is low. Replace the batteries with new ones (see page 7).
¡
There is no room left in memory to record a message. Erase some or all
messages (see page 30).
¡
The ANS/FAX mode greeting message has not been recorded.
Record the message (see page 15).
¡
The TEL/FAX mode greeting message has not been recorded.
Record the message (see page 15).
Error messages on the display
CAUSE & REMEDY
If the unit detects a problem, one of the following messages will appear on the display.
ERROR MESSAGE
¡
The recording paper is jammed near the paper cassette. Clear the jammed
paper (see page 74).
¡
The top cover is open. Close it.
¡
The document is not fed into the unit properly. Reinsert the document and try
again. If misfeeding occurs frequently, clean the feeder rollers (see page 77).
If the problem remains, adjust the feeder pressure (see page 76).
¡
The film is not inserted in the cartridge correctly.
Reinsert it correctly by referring to step 8 on page 79.
¡
Memory (phone numbers, parameters, etc.) has been erased.
Re-program.
¡
Film is empty. Replace the film or film cartridge with a new one (see page 78).
¡
The blue leader of the film was not wound completely or the unit was out of film.
Wait for a while.
¡
The receiving unit was busy or ran out of recording paper. Try again.
¡
The unit is out of recording paper. Install paper (see page 5).
¡
The recording paper is jammed near the head unit. Clear the jammed paper
(see page 74).
¡
The other fax machine does not provide the polling function. Check the other
party.
¡
The document is jammed. Remove the jammed document (see page 76).
¡
Attempted to transmit a document longer than 600 mm (23
5
⁄
8
w
). Press the STOP
button and remove the document (see page 76). Divide it into two or more
sheets and try again.
¡
Transmission error occurred. Try again.
¡
The unit is overheated. Leave it to cool down.
CHECK CASSETTE
POLLING ERROR
PAPER JAMMED
OUT OF PAPER
NO RESPONSE
LOADING FILM
FILM EMPTY
CHECK MEMORY
CHECK FILM
CHECK DOCUMENT
CHECK COVER
REMOVE DOCUMENT
BATTERY LOW
MEMORY FULL
NO ANS GREETING
UNIT OVERHEATED
TRANSMIT ERROR
9. Troubleshooting and Routine Care
NO TEL GREETING