5
1
1. Installation and Connection
1
Open the paper cassette cover.
¡
When removing the paper cassette from the
unit, lift it up slightly (
A
) and pull it towards
you (
B
).
2
Fan the stack of paper to avoid a paper jam.
3
Insert the paper by aligning the paper edges
with the partition.
¡
Most paper has instructions recommending
the side to print on. Insert the paper with the
print side down.
¡
The height of the paper should not exceed
the limit mark on the paper cassette or it
may cause a paper jam.
4
Push down the opposite edges so they are
secured under the clips.
You can use A4 size paper. The paper cassette can hold up to 250 sheets of 75 g/m
2
(20 lb.) paper. Use 60 to
90 g/m
2
(16 to 24 lb.) paper.
PULL UP
PULL UP
UPPER LIMIT
Limit mark
Paper cassette
cover
Partition
Clip
A
B
Correct
Incorrect
Installing the paper cassette
5
Close the paper cassette cover and insert the
paper cassette into the unit until it clicks into
place.
Note:
¡
Do not insert paper of different thickness into the cassette at same time. This may cause a paper jam.
¡
Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkled, or paper with a cotton and/or fiber content that is over 20%.
¡
Avoid used paper for double-sided printing.
¡
Do not use paper printed with this unit for double-sided printing with other copiers or printers, or a paper
jam may occur.