Panasonic KV-SS905C, Руководство по эксплуатации

Страница: 26 / 62

Display Panel Instructions
26
07 Checking the roller modules
replacement warning
0%: This is displayed when “Replace Roll. Warning
≤≤
%” is cleared.
100%: This is displayed when the roller modules need to be
replaced.
07 Clearing the roller modules
replacement warning
When pressing the
1
key and the
2
key simultaneously,
“Replace Roll. Warning” will be cleared. Then “Completed”
will be displayed.
08 Setting the product ID
The applications for the scanner which have been set can be
used.
• An error results if an attempt is made to use a function
which are not provided with the KV-S3095C/KV-S3085
series of scanners.
• No guarantees are given for complete compatibility.
09 Setting the sleep mode
To conserve energy and operating cost, this
scanner is provided with a programmable
power save feature. The scanner is factory
set with the power save feature (sleep mode)
turned on to comply with E
NERGY
S
TAR
®
requirement. If sleep mode is enabled, the
scanner enters the sleep mode when the
scanner is idle for 15 minutes.
• 1min.
T
60min.
• To return from the sleep mode, press any key on the
scanner or issue the scan instruction from the application.
0 7 . R e p l a c e R o l l e r
W a r n i n g 0 %
0 7 . R e p l a c e R o l l e r
W a r n i n g C l e a r = < >
0 8 . P r o d u c t I D
K V – S 3 0 9 5 C
0 8 . P r o d u c t I D
K V – S 3 0 8 5
KV-S3095C KV-SS905C KV-SS855
KV-S3095C
KV-S3085 KV-SS905C KV-SS855
KV-S3085
0 9 . S l e e p M o d e
A f t e r 1 5 m i n .
Disable After 1 min.
T
After 60 min.