Panasonic KV-S1027C, Руководство по обслуживанию

Страница: 51 / 255

51
9.3.8. Other
• Click “System Log” on the main menu to save the scanner and PC information as text files.
• Click “Download the latest version” to open the site for Panasonic scanner products that provides the scanner software to be
downloaded.
• Click “ErrorLog” to open “Save As” dialog-box.
Then after renaming a log file, perform “Save” to save it.
Double Feed 1. Click “Adjust” on the main menu.
2. Adjust Automatically.
a. Set the Shading Sheet (Part No.: See.
Tool
(
P.144
)) on the
Feed Tray in portrait orientation, sliding the Document
Guides so that they match the document width.
b. Click
“Double Feed” on the Adjust menu.
c. Click “Adjust Automatically” to adjust the double feed
sensitivity.
d. Check the result.
e. Click
“OK” to finish the adjustment.
f. Click “OK” on the “Double Feed Detector” dialog box to
return to the Adjust menu.
3. Adjust Manually.
a. Click
“Double Feed” on the Adjust menu.
b. Change the parameter ( “Send Level” ) .
c. Click “OK” to return to the Adjust menu.
—
* USB ID 1. Click “Adjust” on the main menu.
2. Click “ USB ID” on the Adjust menu to enter the “USB ID” .
3. Click “Set” to store a new ID number for a newly replaced
CONTROL Board.
4. Click “Close” to return to the Adjust menu.
—
*This setting is available only
for a newly replaced
CONTROL Board (or IC28).
Sensor Sensitive
Level 1.Click “Adjust” on the main menu.
2.Click “Sensor Sensitive Level” on the Adjust menu.
Note:
* If dusts remain on the Starting Sensor, the adjustment is not
done properly and the paper detection may not work.
3.Click “Adjust” to adjust the sensor Sensitive level.
4.Check the sensor sensitive level (Offset, LED Current, Slice).
5.Click
“Close” to return to the Adjust menu.
—
Good Result
LED current : 50 to 254
Item Operation Default Remarks