49
LSQT1093
Recording
ª
About auto mode
Set the AUTO/MANUAL/FOCUS switch to
AUTO, and color balance (white balance) and
focusing will be adjusted automatically.
– Automatic white balance (
l
127)
– Auto focus (
l
128)
Depending on the brightness of the subject etc.,
the aperture and shutter speed are automatically
adjusted for an optimum brightness.
(The shutter speed is adjusted to a maximum of
1/250 in recording mode.)
≥
Color balance and focus may not be adjusted
automatically depending on light sources or
scenes. If so, manually adjust these settings.
– Scene mode setting (
l
69)
– White balance setting (
l
71)
– Shutter speed setting (
l
73)
– Iris/gain value setting (
l
73)
– Manual focus setting (
l
70)
This function prevents unnecessary recording
when you forget to pause recording and walk
with the unit tilted upside down while recording
continues.
≥
If the unit continues to be tilted upside down
from the normal horizontal position while
recording motion pictures, it is automatically set
to recording pause.
Turning the AGS function on/off
¬
Rotate the mode dial to select
.
Press the MENU button, then select
[VIDEO]
#
[AGS]
#
[ON] or [OFF]
and press the cursor button.
≥
This function’s default setting is [OFF].
≥
The AGS function may activate and cause the
unit to pause the recording if you are recording
a subject right above or right below you. In
these cases, set [AGS] to [OFF] then continue
the recording.
≥
Use the recording start/stop button to pause
the recording. The AGS function is only a
backup function for when you forget to pause
the recording.
≥
The time it takes the unit to be put into
recording pause after being tilted upside down
varies depending on the operating conditions.
AUTO
MANUAL
FOCUS
Auto Ground-directional Standby
(AGS)
MENU
LSQT1093ENG.book 49 ページ ２００７年１月１５日 月曜日 午前９時２３分
