Others
115
LSQT1093
It is possible that the system cannot complete writing of a file normally when, for example, power is
turned off for some reason during recording or editing.
If faulty management information is found when a disc is accessed, the following message may appear.
(Repairing may take time depending on the error.)
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[FINISHED]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
≥
Use a sufficiently charged battery or the AC adaptor.
≥
Depending on the condition of the data, it may not be possible to completely repair the data.
≥
If the recovery fails, you will no longer be able to playback the data recorded before the power went
off.
≥
When data recorded on another device is recovered, it may not be possible to play back the data on
this unit or the other device.
≥
If the thumbnail information is recovered, displaying the thumbnails may become slower.
About recovery
CONTROL DATA ERROR HAS BEEN
DETECTED.
THUMBNAIL DATA ERROR IS DETECTED.
LSQT1093ENG.book 115 ページ 2007年1月15日 月曜日 午前9時23分