101
LSQT1093
With other products
6
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4
k
5 INCH]:
L size
[5
k
7 INCH]:
2L size
[4
k
6 INCH]:
Postcard size
[A4]:
A4 size
≥
You cannot set paper sizes not supported on
the printer.
7
Select the layout setting on
[PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[
]:
No frame print
[
]:
Frame print
≥
You cannot set page layouts not supported on
the printer.
8
Select [PRINT]
#
[YES] and press
the cursor button to print the
pictures.
≥
Exit PictBridge by disconnecting the USB
cable (supplied) after the pictures have
been printed.
When you stop printing halfway
Move the cursor button down.
≥
A confirmation message appears. If [YES] is
selected, the number of prints set is canceled
and the screen returns to step 2. If [NO] is
selected, all the settings are kept and the
screen returns to step 3.
≥
Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥
Check the settings for the paper size, quality of
print, etc. on the printer.
≥
The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check before printing. When using a printer
with a trimming or borderless printing function,
cancel this function before printing. (Refer to
the operating instructions of the printer for
details.)
≥
You may not be able to print still pictures
recorded with other products.
≥
When the unit is connected directly to the
printer, the DPOF settings cannot be used.
≥
Connect the printer directly to this unit. Do not
use a USB hub.
LSQT1093ENG.book 101 ページ ２００７年１月１５日 月曜日 午前９時２３分
