Panasonic HC-X2 Скачать руководство пользователя

Страница: 46 / 313

Preparations before recording – Preparing the memory card

Status of the card access lamp and memory card

Inserting/removing the memory card

Inserting the memory card

The memory card to use with the unit should always be formatted on the unit. (

Formatting the memory card: 47

)

•

Formatting the memory card will erase all of the recorded data which cannot be restored.

(A) Card slot cover
(B) Terminal side
(C) Card 1 access lamp
(D) Card slot 1
(E) Card 2 access lamp
(F) Card slot 2

Open the card slot cover.

Insert the memory card into the card slot.

•

Card slot 1 and card slot 2 can each insert one memory card.

•

With the terminal facing in the direction indicated in the diagram, push in until there is a click.

Do not force or apply excess force when inserting the memory card.

Close the card slot cover.

Card access lamp

Memory card status

Orange (illuminated)

Recording target

Both loading/writing are permitted. Current recording target.

Green (illuminated)

Recording possible

Both loading/writing are permitted.

Orange (flashing)

Accessing card

Loading/writing are currently being performed.

Orange (rapidly flashing)

Recognizing memory card

The memory card is being recognized.

Error

An error has occurred. This will flash even if the memory card is
not inserted when an error has occurred.

Green (slowly flashing)

No remaining recording capacity

No recording capacity left on the memory card. Only loading is
possible.

Write-protected

The write-protection switch of the memory card is set to the
LOCK side.

Recording not possible

It cannot record with the recording format that is currently set.
Change the recording format or use a memory card compatible
with the recording format to record.

Off

No memory card inserted

A memory card has not been inserted.

Illegal format

It is not the correct format. Reformat the card.

Card not supported

This is a card that cannot be used with the unit, such as MMC
(Multi Media Card).

During card reader mode

The card 1 access lamp/card 2 access lamp turns off when not
accessing.

•

The card access lamps will not illuminate or flash when the [OTHERS] menu

[LED]

[ACCESS LED]

[OFF] is set.

(A)

(B)

(C)

(D)

(E)

(F)

Содержание HC-X2


























































































































































































































































































































Результаты поиска

Содержание HC-X2

Отзывы:

Похожие инструкции для HC-X2

Бренды по названию

Популярные бренды

Panasonic HC-X2, Руководство по эксплуатации

Результаты поиска

Содержание HC-X2

Отзывы:

Похожие инструкции для HC-X2

Бренды по названию

Популярные бренды