Panasonic HC-X2, Руководство по эксплуатации

Страница: 285 / 313

Network Connection – Streaming function
285
Management of setting information
You can set, save and load the RTMP(S) destination.
™ Setting of the destination
Information regarding the destination can be set or referenced.
Setting the destination with the camera menu
1
Select the [NETWORK] menu ¨ [STREAMING] ¨ [CONNECTION INFO.] ¨ [MEMORY].
2
Enter the destination URL in the [NETWORK] menu
¨
[STREAMING]
¨
[RTMP(S)
RECEIVER URL].
•
Enter the destination URL in following format.
– rtmp://(server URL):(port number)/(path)/(stream key)
– rtmps://(server URL):(port number)/(path)/(stream key)
Referencing destination from the memory card
1
Insert the memory card with the destination information saved.
•
The card slot to perform loading and saving can be set in the [OTHERS] menu ¨ [FILE] ¨ [SLOT FOR LOAD/SAVE].
2
Select the [NETWORK] menu
¨
[STREAMING]
¨
[CONNECTION INFO.]
¨
[SD CARD].
™ Saving the destination information on the memory card
1
Insert a memory card formatted with the unit.
•
The card slot to perform loading and saving can be set in the [OTHERS] menu ¨ [FILE] ¨ [SLOT FOR LOAD/SAVE].
2
Select the [NETWORK] menu
¨
[STREAMING]
¨
[SAVE (SD CARD)].
3
Select [YES].
™
Loading destination information from the memory card
1
Insert the memory card with the destination information saved.
•
The card slot to perform loading and saving can be set in the [OTHERS] menu
¨
[FILE]
¨
[SLOT FOR LOAD/SAVE].
2
Select the [NETWORK] menu ¨ [STREAMING] ¨ [LOAD (SD CARD)].
3
Select [YES].
•
In general, a parameter for the stream key is required for URL, but the stream key may be contained as a part of the path
depending on the service. For details, refer to the manual for each streaming service.
•
If the setting information in the memory card is not information for the selected protocol or the cloud, it will be treated as no
setting.
•
Only items saved are the ones that are used in the destination setting.
•
The name of the file in the memory card to save the destination information cannot be changed.
•
The file with the destination information saved on the memory card is encrypted.
•
Save is not possible when the starting character string of the [RTMP(S) RECEIVER URL] (“rtmp://”, etc.) is not set correctly.
•
The name of the file to load destination information saved on the memory card cannot be selected.
•
The setting information that can be loaded (referenced) by the unit is as follows.
– Information saved with the unit
– Setting file created with the P2 Network Setting software (
Î Entering the setting using the setting tool: 286 )