Panasonic HC-X2 страница 233 Скачать руководство пользователя

Страница: 233 / 313

Playback – Copying clip

233

Copying clip

Clips can be copied between memory cards.
Only the clip recorded in AVCHD can be copied.

Press the <THUMBNAIL> button.

The thumbnail screen is displayed.

Press the <MENU> button while the thumbnail screen is displayed.

The menu is displayed.

Select the [THUMBNAIL] menu

[CLIP]

[COPY]

[SELECT].

•

Selecting [ALL] copies all the clips between the memory cards.

Select the card slot for the copy destination.

[SLOT1→SLOT2]:

Copies clips from the memory card in card slot 1 to the memory card in card slot 2.

[SLOT2→SLOT1]:

Copies clips from the memory card in card slot 2 to the memory card in card slot 1.

The clips on the memory card of the copy source is displayed in the thumbnail screen.

Select the clip to copy in the thumbnail screen.

is displayed on the selected clip.

Select [

•

This can also be selected by pressing and holding the multidial.

When the confirmation message is displayed, select [SET].

Progress bar is displayed, and the copy of the clip starts.

•

To cancel the copy midway, select [CANCEL].

When the completion message is displayed, select [ ].

When deleting clips after copying is complete, before deletion make sure you play back the copied clip to confirm
that it has been copied properly.

•

When there are a large number of clips, it may take longer to copy the clips.

•

The clip whose recording file format is MOV/MP4 cannot be copied.

•

The copy is not possible when the volume of the selected clip is larger than the available card capacity of the destination.

•

The copy is not possible when the copy destination card is write protected.

•

The copy is not possible when the maximum number of the clips will exceed.

•

The copy is not possible when the maximum number of the playlist will exceed.

•

It may not be possible to copy clips recorded on other equipment. Data that was recorded on a computer cannot be copied.

•

The protection setting for clips is cleared when they are copied.

•

The order of clips copied cannot be changed.

0001

00:08:17.15

0002

00:08:47.15

0003

00:09:11.00

0004

00:09:32.15

0005

00:09:50.15

0006

00:10:08.00

0007

00:10:20.15

0008

00:10:38.15

0009

00:10:52.15

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

Содержание HC-X2


























































































































































































































































































































Результаты поиска

Содержание HC-X2

Отзывы:

Похожие инструкции для HC-X2

Бренды по названию

Популярные бренды

Panasonic HC-X2, Руководство по эксплуатации

Результаты поиска

Содержание HC-X2

Отзывы:

Похожие инструкции для HC-X2

Бренды по названию

Популярные бренды