Playback – Restoring clips
236
Restoring clips
In following cases, restoration of the clip may be required depending on the condition. It may take some time to restore
depending on the error.
•
When the memory card in the card slot that is flashing is removed while the card 1 access lamp or the card 2 access lamp is
flashing
•
When the power is turned off by removing the battery or the AC adaptor while recording or performing record completion
process
Restoring a clip
When abnormal management information is detected, the error message [There are clips that need restoration.] is displayed on
the screen.
1
Select [SET] in the error message screen.
•
Once the repair is completed, select [
] in the confirmation message. It will return to the previous screen.
•
is displayed on the clip when an abnormal management information is detected while displaying the thumbnail.
•
Do not remove the memory card in the card slot that is flashing, or do not remove the battery or the AC adaptor when the
card 1 access lamp/card 2 access lamp is flashing in orange. Doing so will cause damage to the memory card.
•
Use a sufficiently charged battery or AC adaptor.
•
It may not be possible to completely repair depending on the condition of the data.
•
To restore the clips, it is necessary that the clips are recorded for more than a certain amount of time. Especially in the
following cases, the clips may not be restored, because the number of frames to be recorded is small.
– When the variable frame rate recording function is enabled, and the frame rate lower than the system frequency is set.
– When the interval recording function is enabled.
•
The clips shot before the power was turned off will not be able to play back if the repair fails.
Also, it may not be possible to record any more.
•
If data recorded with other device is repaired, it may not be able to play back on the unit or other device.
•
If the repair failed, turn off the unit, and turn it back on after waiting for a while. If the repair fails repeatedly, format with the
unit. All data will be erased when it is formatted, and it cannot be restored.
•
Display of the thumbnail may become slower when the thumbnail information is repaired.